Most of us take our toilets for granted. Though they’re only used several times a day and once or twice at night, we never think about them breaking.
Unless, of course, your toilet won’t flush.
Being stuck without a functioning toilet is about as bad as it gets. But a useless toilet can serve as a crappy placeholder for being lost in the woods.
So what can you do if your toilet is flushing slowly? Luckily, there are a variety of common solutions. In this article, we’ll cover the solutions, as well as the causes and preventative measures.
Make Sure There Is No Blockage in the Toilet Trap
An easy way to check is to remove the toilet seat, dissolve the water, and use a flashlight to see if anything is stuck. Look for potential obstacles such as large clumps of toilet paper, toys, and other items that can get stuck in the bowl of the trap and prevent a normal flush. If you see this, remove the blockage with a pair of long-handled tweezers or a plunger.
Check the Tanks Ballcock and Float Cup Assembly
Ballcocks and float cup assembly are common toilet issues for toilets, allowing water to enter the tank but not promoting adequate flushing. When this happens, you’ll need to inspect the tank for any problems with the rubber seal.
If the seat is broken, you’ll need to replace it. It’s also a good idea to check the float cup assembly for signs of damage or for anything that might be preventing it from functioning.
Check Water Supply Line for Leaks
Ensure that the water shut-off valve leading to the toilet is open. After this, locate the section of the water supply line that leads from the wall to the toilet itself.
Inspect the lines for signs of corrosion or punctures in the material. Pay special attention to any joints or connections in the line. In some cases, the lines may need to be replaced if they are damaged or leaking.
Investigate the Tank’s Flapper
This is an important step as even small leaks can decrease the pressure of the water. You can check for a leak by reaching your arm down the side of the toilet tank and feeling for any wet spots. If you find one, it’s a sign that the clogged pipe feeding into the tank is producing drops of water.
Check the entire length of the pipe for any water drops or dripping. If there is a leak, click for plumbing services and a qualified technician that can provide the skills necessary to identify and remove the blockage, restoring the proper flush of your toilet.
Ways to Fix if Your Toilet is Flushing Slow
After investigating, if the toilet is flushing slowly, it is recommended that you call a plumber. It’s important to remember that a slow flush can be caused by a variety of problems.
Troubleshooting a slow toilet can be a challenging task, but it’s worth the effort to keep your full drains running. Take action now. Don’t delay and see if it resolves itself.
Check out our website for more articles on a wide variety of topics.