There are plenty of things that can go wrong in commercial buildings. Are you ready to handle everything thrown at you? 

Do you know how to handle a burst pipe? How about a faulty exhaust fan? What would you do if you saw a mouse in the kitchen? Where would you start?

You need a plan before problems occur! Get an idea of common commercial plumbing problems, then address the most important ones. Read on to find the best plumbing services and fix any potential issues before they occur.

Clogged Drains or Sewer Pipes

Clogged drains or sewer pipes can be one of the most common commercial plumbing problems. By tackling these issues early, the overall cost of repair can be significantly minimized.

Identify the cause of the blockage. This can be grease, hair, foreign objects, tree roots, etc. Once identified, the appropriate remedy can be applied.

For small to medium clogs, a sewer snake may be used. For larger blocks, chemical drain openers or jetting may be utilized. If the clog is due to tree roots, then the root would need to be manually removed.

Preventative maintenance, such as routine cleaning, can help to discourage further drains from clogging up.

Broken or Frozen Pipe

When a pipe breaks, the water can flood floors. The pressure in the plumbing system can drop significantly.

To solve this issue, start by identifying the affected pipes. Make sure to close the water valves.

Once the water valves are closed, call a professional plumber to replace the damaged pipes. If the pipes are frozen, locate the pipes that are affected. Slowly raise the temperature in the area.

If the heat does not work, you can use a hair dryer or pipe thawer. Once the pipes are unfrozen, use duct tape to repair the cracks and prevent further damage. Finally, increase the temperature in the area to prevent the pipes from freezing again.

Leaky Faucet

Another common commercial plumbing problem is a leaky faucet. To solve this plumbing issue, it is important to identify the source of the leak. Then, make the necessary repairs.

Ensure to check for any signs of wear and tear. This can be broken or weak connections. If any exist, these must be replaced quickly.

Next, check the water pressure in the faucet and adjust it if needed. If the leak persists, check the O-rings and other seals. Lastly, if the faucet still leaks, it may be necessary to replace the entire faucet.

Low Water Pressure

To fix this problem, you should first figure out where the low pressure is coming from. There could be a problem with the municipal water supply or a blockage in the plumbing line.

Check the water heater to see if it needs to be serviced or replaced. Inspect the pressure-reducing valves to make sure they are functioning properly.

If none of these solutions work, consider a plumbing service company to investigate further. This company can detect the source of the blockage or corrosion in the pipes and clear it out. They can also adjust the pressure-reducing valves or install new fittings to correct the water flow.

Solve the Most Common Commercial Plumbing Problems Now

Solving commercial plumbing problems doesn’t need to be a daunting task. With the following strategies, any owner, manager, or technician should be able to diagnose and repair most commercial plumbing issues.

If you are still struggling, don’t hesitate to contact a local professional experienced in commercial plumbing solutions.

Visit our blog for more articles like this!