From small leaks to major repairs, every homeowner encounters the wrath of plumbing problems at one point or another. Although some of these issues are easy to solve and inexpensive, a few will put a hole in your pocket. And keeping the plumbing trouble unattended will cause damage to your home over time.

Each of these plumbing problems requirea different fix or solution. Here, we will discuss the common plumbing problems that homeowners suffer through and possible solutions.

6 Common Plumbing Issues&Their Solutions

The most frequent and common plumbing problems include leaking pipes, running toilet, slow-moving drains, low water pressure, etc. Here are some brief notes on these plumbing issues and the solutions.

1. Dripping Faucets

A commonly faced problem when it comes to plumbing is dripping faucets. We often do not pay attention to the slowly dripping water from our kitchen or bathroom faucets. Suppose a drop of water falls from the faucet every second. So, each day, almost 86,400 droplets of water go to waste.

Every day, dripping faucets contribute to several gallons of water waste and increase the overall utility bill. In cases like these, make sure that you get the faucet repaired as soon as it begins dripping.

2. Low Water Pressure

A thin stream of water coming from the faucets or showerheads can often be annoying. And on top of that, it indicates a significant problem in the plumbing system of your home.

This low water pressure can be caused by a number of reasons. This includes half-opened water valves, blocked pipes, and many more.

To solve this problem and enjoy a proper water flow, check the valve and ensure it is fully open. You can also check the water pressure from the main line with the help of a pressure gauge. Contact a professional plumber to check the entire system for blocked pipes or any other issues.

3. Clogged Drains

Do you ever see the water moving down the sink or tub at an excruciatingly slow rate? This is a frequent issue and happens when the drains are clogged due to hair, dirt, soap, and so on. However, plunging sinks and tubs are not a good idea, and it is very unhygienic.

When you notice that your drains are clogged, call a plumbing expert to unclog the drains.

Professional help is required as unclogging drains typically involves digging, and the drainpipes are behind the wall. In order to reduce the risks of clogged pipes, make sure to clean the drains with a drain cleaner on a regular basis.

4. Broken Toilet Chain

One of the most common plumbing troubles is the broken toilet chain. The toilet chain is placed inside the flush tank of the toilet. When you press the flush, the mechanism moves the chain, which unplugs a flap, allowing water to move to the bowl. However, when the chain breaks, the mechanism breaks, disabling the flush.

Replacing the broken chain with a new one is the only solution here. You can replace the chain yourself with pliers. If you do not have any knowledge or experience, rely on Dallas Plumbing Pros for the job.

5. Leaking Pipes

Leaking pipes are more than a headache. Not only do these pipes waste a significant amount of water, but they also cause damage to the home. Water leakage from these pipes damages the furniture along with the walls. And this damage from the leakage results in a costly repair.

These leaks usually happen due to corrosion or damage to the pipes. And repairing the pipes cost a decent amount of money. Getin touch with an experienced plumber when you notice it.

6. Running Toilet

Another issue that most people encounter is the running toilet. And this issue will significantly increase the utility bill as it wastes several gallons of water each day. The main reason behind the problem is a faulty flapper valve which fails to control the water moving from the tank to the toilet bowl.

You can easily repair the issue with a toilet repair kit without any hassle, or you can take the help of a professional. Replace the flapper valve with a new one and put some food coloring in the tank to see whether it runs without pressing flush. If the problem persists, kindly contact an experienced plumber to repair the toilet.

Frequently Asked Questions

What Is The Total Cost Of Repiping An Entire House?

The cost of repiping an entire house depends on the number of bathrooms you have, the conditions of the pipes, and so on. The quality of the pipe and labor costs also play significant roles in the entire scenario. Typically, the average cost to repipe an entire home ranges from $2000 to $8000.

Are Plumbing Problems Covered With Homeowners Insurance?

Maintenance of the plumbing system is typically seen as a homeowner’s responsibility. The homeowners insurance does not cover plumbing repair or replacement. It only covers the damage that the water or plumbing system causes to the home, and in most cases, the coverage is partial.

How To Identify A Leaking Pipe?

Leaking pipes are easy to identify as the signs are pretty obvious. This includes unpleasant odor, mold, and mildew on the home surfaces, damage to walls and ceiling, and so on.

Bottom Line

Plumbing problems are nothing new. Even though these issues are very common, they can easily increase your overall bill by a notch. On top of that, the repairs are often expensive due to the damage to the walls, furniture, and so on.

In order to prevent plumbing trouble from damaging your home, proper plumbing maintenance is a must. Do not forget to get these issues repaired as soon as you notice.